JUMO Dtrans P20 proces pressure sensor

Short description
The device with the HART® interface combines maximum precision with simple operation. It is used to measure the system pressure of gas, steam and liquids. The built-in LCD displays readings and device data. The device can be installed up to zone 0 in the version with explosion protection “Ex ia (intrinsically safe)”.
The housing and sensor are manufactured from high-grade stainless steel. Diaphragm seals can also be connected for specific process technology applications.(see data sheets 409772 to 409784).
The pressure transmitter can be programmed and can therefore be flexibly adapted for various measuring tasks. There is an easy-to-use setup program available as an accessory for operation via interfaces. A rotary knob allows for quick and easy on-site manual operation.
The pressure transmitter with 4 to 20 mA and HART® protocol was evaluated with regard to functional safety and is certified by TÜV Nord according to DIN EN 61508/-1/-2, edition 2.0. These measuring devices are suitable for monitoring process level and process pressure up to SIL2. Further details can be found in the Safety Manual.

Operating temperature	-40 to +115 °C
Process connection	G3/4, G1/2, NPT, M20 x 1,5, Taper socket, Clamp connection, Tank connection, Jumo PEKA, Diaphragm seal
International protection rating	To IP66
Output signal	4 to 20 mA 2-Wire HART® protocol
Particularities	Programmable stainless steel shell, Measuring range 1:50, Selectable unit of measure
Certificates	EAC, EHEDG, SIL, Ex d (ATEX, EAC Ex)
LCD display	With or Without
Electrical connection	Cable connection
Deviation	0,08 to 0,24%
Measuring range	-1 bar to +600 bar relative, 0 to 100 bar absolute
Process connection material	Stainless steel AISI 316, NiMo
Measuring equipment liquid	None, Silicon oil
Brand	JUMO
Order code	To view the possible options, you can find the options with the relevant codes in the Data sheet documents. Or contact us if you have specific wishes that are not in the documents