Meridian 5G M Routers

Routers are the connecting parts between your panels and the system network. The router makes your interface available between the panels and the interface setup. All data is send to the system via the M router, so you can see current information about the functionalaty of the system. See Meridian user interface manual document.

Overview of all avialable M routers
The M routers have the following features:
(All M routers are meant for installation with an existing antenna set up, and do not include antennas.)

Overview:

• 5G modem(s) with 2 push-pull SIM slots (Nano, 4FF); 4x SMA(f) connectors per modem
• WiFi 6 bridge and access-point mode; 2x RP-SMA(f) connectors; MU-MiMo
• Dual-LEO (e.g. Starlink Maritime) connectivity
• Mounting: wall, ceiling or DIN rail
• Power: 120W peak load. DC 8..35V (24V recommended) – terminal block
• Network: 3x RJ45 2.5Gbps (100/1000Mbps compatible), thereof 2x PoE+ 30

M1-R (rugged):

• Meant for installations above deck like inside existing domes at the base etc
• One 5G modem
• Operating temperature: -40° to +85°C

M1-R (rugged) specifications:

• 5G modem with 2 push-pull SIM slots (Nano, 4FF); 4x SMA(f) connectors
• WiFi 6 bridge and access-point mode; 2x RP-SMA(f) connectors; MU-MiMo
• Connection bonding or load balancing modes
• Can be used to connect multiple LEO dishes/panels (e.g. Starlink Maritime) and bond with 5G
• Dual-LEO (e.g. Starlink Maritime) connectivity

• Dimensions: 153mm (width), 108mm (depth), 72mm (height)
• Weight: 2kg
• Mounting: wall, ceiling or DIN rail
• Operating temperature: -40° to +85°C
• Power: 120W peak load. DC 8..35V (24V recommended) – terminal block
• Network: 3x RJ45 2.5Gbps (100/1000Mbps compatible), thereof 2x PoE+ 30W

M1-NR (non-rugged):

• Meant for installation inside a 19″ rack or alike in an air conditioned environment
• One 5G modem
• Operating temperature: 10°-40°C, non condensing

M2-R:

• Same as M1-R (rugged) but with 2 modems

M2-NR:

• Same as M1-NR non-rugged but with 2 modems

Upgrade options
For cases when a more affordable version is needed you can opt for an M router and later upgrade it with a panel or two, when the budget allows. You can also do an initial installation of an M router with one or two panels included so you can take advantage of both – the existing antenna set up and the unique features of the Meridian panels. Panels are $3000 each.
Rugged versions of our M routers are usually installed above deck. Such installations can be upgraded with a panel (up to 2 panels possible), typically installed inside an existing VSAT or TVRO dome.

The following criteria has to be met for the upgrade to be possible:

• Distance: a panel has to be installed within 2 meter distance from the M router
• Panel Mounting: panels can be mounted either vertically or horizontally, but not flat
• Mounting bracket: will be provided (spec on page X)
• Cabling required: cable to connect the panel is a USB 3.2 cable with USB-C connector
• Operating temperature: -40° to +75°C
• Optional: SIM extender can be added

Note: for a 100% good working system, a 360° non-blocked horizontal line of sight is recommended.