JUMO TecLine CR conductive two-electrode conductivity sensor

Description

Measurement applications

Pure and highly-purified water
Pharmaceutical industry
Chemicals
Food technology
Shipbuilding
Ion exchangers
Reverse osmosis plants

Short description
The JUMO conductivity sensors are used in conjunction with suitable transducers to define the electrolytic conductivity in liquids. The type series 202924 sensors work according to the 2-electrodes principle. The transducer supplies them with alternating voltage. The amount of current that is carried through the liquid and the electrodes is defined by the medium’s conductivity.
The materials in the sensors are physiologically harmless and meet FDA requirements.

Operating temperature	To 200 °C
Measuring insert	1 x pt100 2-wire, 1 x pt1000 2-wire
Process connection	Thread (G 1/2 A, G 3/4 A, G 1 A, 1/2"-14 NPT, 3/4"-14 NPT), Taper socket for union nut DN25, Clamp DN25, JUMO PEKA
Certificates	FDA
Electrical connection	Permanent cable 5 m, Right-angle connector, M12 connector
Pressure resistance	16 bar at 25 °C, 9 bar at 60 °C, 1 bar at 135 °C, 9 bar at 60 °C, 5 bar at 150 °C (Max 45 min), 40 bar at 25 °C, 17 bar at 200 °C
Process connection material	Stainless steel 1.4404, Stainless steel 1.4571, Stainless steel 1.4435, PVDF (Default)
Cell constant	K = 0.01 (Range 0.05 to 20 MΩcm or 0.05 to 20 μS/cm), K = 0.1 (Range 0.1 μS/cm to 1 mS/cm)
Electrode material	Stainless steel 1.4404, Stainless steel 1.4571, Stainless steel 1.4435, Titanium
Brand	JUMO
Order code	To view the possible options, you can find the options with the relevant codes in the Data sheet documents. Or contact us if you have specific wishes that are not in the documents